ManyKeep Decision Hub › Industrial & Exit Hub › Industrial Equipment Repair vs. Replace (Defender vs. Challenger EAC Calculator)
Global Currency & Capital Budgeting Mode: Scales CapEx, overhaul quotes, O&M & salvage values

Industrial Repair or Replace Calculator: Equivalent Annual Cost (EAC) & Defender vs. Challenger Engine

When comparing a 3-year overhaul of an existing machine (The Defender) against buying a brand-new 10-year replacement machine (The Challenger), simple Net Present Value (NPV) fails because the lifespans are unequal. Run engineering-economics Discounted Equivalent Annual Cost (EAC) with foregone trade-in opportunity cost.

1. Load Industrial Equipment Preset or Enter Defender vs. Challenger Inputs

The Defender (Keep & Overhaul Existing Asset)

The Challenger (New Replacement Asset)

Audit Equipment AMC Quote →
REPLACE WITH CHALLENGER — SAVES $5,180 / YEAR IN EAC
$21,712/yr Challenger EAC vs. $27,918/yr Defender EAC

Once $14,000 in foregone trade-in value and $16,500/yr in old-machine O&M/downtime are annualized at 9% WACC, replacing now saves $6,206 per year.

Defender EAC (Keep)
$27,918/yr
3-Yr PV Cost: $70,668
Challenger EAC (Replace)
$21,712/yr
10-Yr PV Cost: $139,340
Annual EAC Advantage
+$6,206/yr
Annualized cost delta
Max Viable Overhaul
$2,290
Break-even repair cap
What Would Change the Answer?
Loading sensitivity breakdown…
Sponsored Industrial & Fleet Finance Resource
Reserved 280px Zero-CLS Display Container

2. Defender vs. Challenger Capital Budgeting Benchmarks Across Asset Classes

In plant engineering and corporate finance (NIST Handbook 135), keeping an existing machine (The Defender) is never “free”—by refusing to replace it today, the firm forfeits the machine’s current liquid trade-in/resale value (Vtrade,0) AND incurs higher annual energy, scrap-rate, and unplanned downtime costs:

Industrial / Commercial AssetTypical Overhaul ExtensionNew Challenger Economic LifePrimary Challenger O&M AdvantageEAC Replacement Trigger
CNC Machining / Injection Molding3 – 4 Years (Spindle/Ballscrew)10 – 12 YearsLower scrap rate, faster cycle time & 80% less unscheduled downtimeWhen overhaul + current trade-in value exceeds 28% of new CapEx.
Material Handling / Forklift Fleet2 – 3 Years (Engine/Trans/Mast)7 – 9 YearsMaintenance drops from $4.50/operating hr (Yr 8) to $1.10/hr (Yr 1)After 10,000–12,000 operating hours when annual O&M exceeds EAC.
Rotary Screw Air Compressors & Chillers4 – 5 Years (Airend rebuild)12 – 15 YearsVariable Speed Drive (VSD) cuts electricity (75% of lifetime TCO) by 25%–35%Energy savings alone often yield a Challenger EAC lower than a $0 repair.

3. Engineering Methodology: Discounted Equivalent Annual Cost (EAC)

Because an overhauled machine might last ND = 3 years while a brand-new machine lasts NC = 10 years, comparing their total present-value costs directly is invalid (10 years of operation naturally costs more in total dollars than 3 years). Equivalent Annual Cost (EAC) converts each pathway’s Present Value of Costs into a uniform annual annuity payment at corporate discount rate r (WACC):

  1. The Capital Recovery Factor CRF(r, N): For any discount rate r and horizon N years, the annuity factor that converts a lump-sum Present Value into an equal annual cash flow is:

    Annuity_Factor(r, N) = [ 1 – (1 + r)^(-N) ] / r   |   EAC = NPV_Total_Cost / Annuity_Factor(r, N)

  2. The Opportunity Cost View of the Defender: Standard engineering economics charges the Defender’s Year-0 capital cost as C0,Defender = Vtrade,0 + Coverhaul, where Vtrade,0 is the current market resale/trade-in value foregone by keeping the old machine instead of liquidating it today:

    EAC_Defender = [ (TradeIn_Now + Overhaul_Now) – Salvage_N / (1+r)^N ] / AF(r, N) + Annual_OM_Defender

Frequently Asked Questions (FAQ)

Why do we add the old machine’s current trade-in value to the Defender’s cost?

In corporate finance (the “Outsider Viewpoint”), keeping an existing asset that could be sold today for $14,000 requires tying up $14,000 of liquid capital—identical to buying the old machine back from the open market for $14,000 and then paying $18,000 to overhaul it. Avoiding double-counting requires either adding $14,000 to the Defender’s Year-0 cost OR subtracting $14,000 from the Challenger’s CapEx; our EAC formula uses the exact textbook Outsider Viewpoint so unequal lifespans are never distorted.

Why is book value or historical purchase price excluded from the EAC calculation?

What you originally paid for the existing machine years ago is an unrecoverable sunk cost. Only incremental future cash flows, current market trade-in value, and tax shields affect the forward-looking decision.

1-Click Zero-Tracking Calculator Embed Snippet: